NOXGEAR 39G - Page 2

page 2 of 5
www.noxgear.at/hilfe
info@noxgear.at
#noxgearaustria #runfastrunsafe
NOXGEAR Austria
alexanderderler e.U.
Company register number: 479162a
UID-number: ATU72451036
users manual
What is a source device
A source device can be a Bluetooth®-enabled smartphone or a Bluetooth®-enabled smartwatch that stores and plays music les.
According to the manufacturer‘s information, regardless of the brand.
coupling source device (Smartphone/Smartwatch) with the <> NOXGEAR 39G
• Press and hold the Play/Pause button for 3 seconds: Bluetooth® Connecting Modus
• Switch on the Bluetooth® function on your source device (smartphone, smartwatch).
• Let your source device (smartphone/smartwatch) search for Bluetooth® devices (you can nd information on this in the user manual
of your source device)
• through the search, „NOXGEAR 39G“ should also appear in the list of found devices.
• Select „NOXGEAR 39G“ from the list of found devices.
• The connection should be successful and music/telephony should be output via the 39G.
troubleshooting coupling
•
If pairing is not successful the rst time, please switch o the Bluetooth® function on the source device. After a few seconds put in on again.
• It may also help to turn o both devices completly for half a minute.
 If your smartphone and smartwatch are in your area, please switch o the Bluetooth function of that source device, that you do not want to
use as a source or output device.
Switch On
• Press and Hold the Play/Pause button for 2-3 seconds - the devices connect - regular automatically; if there are several source devices,
please actively select the preferred one.
• The 39G says: „NOXGEAR 39G activated - Battery & the current state of charge - „good - medium - low“ - „connected“ and ashes
blue slowly
Switch O
• Press and hold the Play/Pause button for 2-3 seconds
• The 39G says: „Power o“
accept a call
(the 39G must be powered and paired with the source device)
1) at an incoming call, your smartphone/smartwatch will ring
and the NOXGEAR 39G will also play its own ringtone.
2) Briey press the Play/Pause button to answer the call - LED lights up green during the call.
3) A running media playback is paused.
4) You can now conduct the call via the built-in microphone/speaker.
hang up call
• Briey press the Play/Pause button again
• When the call is over, please continue the music using the Play/Pause button.
reject a phone call
• Please press and hold the play/pause button
Music tracks
• next track: Briey press the „double arrow right“ button
• previous track: Briey press the „double arrow left“ button