page 3 of 5
www.noxgear.at/hilfe
info@noxgear.at
#noxgearaustria #runfastrunsafe
NOXGEAR Austria
alexanderderler e.U.
Company register number: 479162a
UID-number: ATU72451036
users manual
Increase/decrease volume
• Briey press the PLUS button for louder
• Briey press the MINUS button for quieter
• Holding down the PLUS or MINUS button changes the volume rapidly and continuously.
troubleshooting volume
If the output of speech or signal tones is too loud or too quiet, please refer to the manual for your smartphone.
Volume
Please choose a comfortable volume for yourself and the people around you
Please respect the privacy and the silence that people and animals need and want around you.
Prolonged listening at high volume levels can damage your hearing and the hearing of your children and pets. Prevent health
damage and avoid hearing at large volume levels over long periods of time. At high volumes, always keep a certain distance from
the device and never put your ears or the ears of children or animals directly to the speaker! When a speaker is set to high
volume, very high sound pressure can result. In addition to organic damage, this can also result in psychological consequences.
Children and pets are particularly at risk.
Info: Set the volume control on your 39G to a low volume before turning it on.
charging current
Please insert the supplied micro-USB plug into the designated charging socket on the underside of the 39G and the other end of the cable
into a standard 5 watt USB power plug (& consequently into a power source).
When connecting the power supply, make sure that the correct voltage is present.
The average charging time is approx. 3 hours (green LED)
The maximum charging current is 0.5 amps
Info: The devices are not fully charged delivered to our customers.
Battery level - acoustic indicator
„battery good“ = 100% to 75% charge level
„battery medium“ = 75% to 25% charge level
„battery low“ = 25% to 0% charge level
Automatic shutdown
The idle timer when paired is 3 hours, while unpaired is 5 minutes.
To protect the battery, the NOXGEAR 39G loudspeaker has a deep discharge
protection that switches o the device when a dened threshold value is reached.
voice assistants
Requirements:
Existing Bluetooth® connection and activadet voice assistant on your smartphone.
To activate the assistant, briey press the button and wait for the assistant to respond.
Then simply speak in the direction of the NOXGEAR 39G.
The volume of speech and signal tones in connection with the voice assistant, depends on the settings of your smartphone.
If the output of speech or signal tones is too loud or too quiet, please read the manual for your smartphone.
To Next Page
Loading...