Test by RJ45 cable (NF-468/NF-468L/NF-468B/NF-468BL)
1. Switch on the power, choose"ON" or "S", the power light
will turn on.
2. If UTP tested, the lights of the main tester and remote tester
will turn on sequently from 1 to 8 and circulates;If STP tested,
the lights of the main tester and remote tester will turn on
sequently from 1 to G and circulates.
3. If the cable is breakage, disorder, short circuit, the result is
as what was said above.
4. After operation, turn off the tester.
NF-468 Main Tester
NF-468 Remote Tester
RJ45 network cable
Your excellent helper in cable test!
3
CABLE TESTER
LAMP
NF-468BL NF-468BL
To Next Page
Loading...
