Need help?Do you have a question about the NOYAFA NF-308 and is the answer not in the manual?
General| Type | Cable Tester |
|---|---|
| Testing Range | Up to 300 meters |
| Length Measurement | Yes |
| Power Supply | 9V battery |
| Cable Types Tested | Coaxial |
| Faults Tested | Open, Short, Cross, Reverse |
| Display | LCD |
| Operating Temperature | 0°C to 40°C |
| Test Functions | Length measurement, Fault location |
Details physical dimensions, power source, LCD display characteristics, and supported cable types.
Specifies ambient temperature range and describes the various tester ports and connectivity options.
Covers length measurement scope, accuracy, calibration, wire sequence checking, and error identification.
Explains cable locating features using remote identifiers and the automatic shut-off functionality.
Shows the main menu structure and explains how to navigate through its options using keys.
Explains how to use the WireMap function to check wiring diagrams and locate errors in cables.
Describes how the display indicates a short circuit in a cable or terminal.
Explains the display when no far-end matcher or local port cable is detected.
Details the display for a successful wiring diagram test with a connected far-end matcher.
Explains the display indicating an open circuit at the far-end of the cable.
Details the display for an open circuit at the near-end of the cable.
Describes the display for an open circuit located in the middle of the cable.
Explains how the display indicates a short circuit during pair and length testing.
Shows the normal display format for successful pair and length measurements.
Details the display for abnormal pair and length results, including unpaired lines and open circuits.
Explains the process for performing dynamic calibration to ensure accurate cable length measurements.
Provides instructions on how to use the receiver unit for locating cables, including sound and light indicators.
To Next Page
