.2 ;NF-468/NF-468L tests RJ45,RJ11
NF-468B/NF-468BL tests RJ45,RJ11 and BNC.
3."OFF" means Power off, "ON" means normal speed, "S"
means Slow Speed.
4. Tickle the "LAMP" button, the light will be on(NF468L/
NF468BL).
II. Operation (eg: RJ45)
Turn on the tester with battery, choose"ON" (Normal grade)
or "S" (Slow grade).Connect the RJ45 cable with Main Tester
and Remote Tester, the lights of the main tester will turn on
sequently from 1 to G as below:
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-2-3-4-5-6-7-8-G
Following are abnormal connections:
1.If one cable ,for example cable NO.3 is open circuited, the
two NO.3 lights of the main tester and remote tester will
not turn on.
2.If several cables are not connected,the corresponding
lights willnot turn on .If less than two cables are connected,
none of the lights is on.
3.If two ends if a cable is disordered, for example NO.2 and
NO.4, then display on:
Main Tester: 1-2-3-4-5-6-7-8-G
Remote Tester: 1-4-3-2-5-6-7-8-G
4.If two or more cables are short circuited, the
corresponding lights won’t be on of the remote tester while
main tester remains normal.
III. If test patch panels or wall plate outlets, two cables which
can match each other (eg 110P4-RJ45) will be connected to
the tester.
Your excellent helper in cable test!
2
To Next Page
Loading...
