NRS Healthcare M11077 User Manual

1
USER INSTRUCTIONS
ADJUSTABLE BATH-STEP RANGE
M11077 Adjustable Bath Step & Support Pillars
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in
a safe place for future reference.
Maximum User Weight
50st
317kg
1. INTENDED USE
To assist users transferring into and out of the bath by reducing the step-over height. It can also provide
assistance when using the toilet or sink in a bathroom environment.
2. SAFETY
WARNING: The maximum user weight must not be
more than 317 kg (50 st).
WARNING: The maximum step height is 175 mm
(7”) using 6 step sections (2 packs).
DO NOT: Stack more than 6 step sections together.
ALWAYS: Make sure the bottom section of the step
has 4 support pillars inserted into the base.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents:
1. Step 50 mm (2”) x 3
2. Support Pillar x 4
4. ASSEMBLY/INSTALLATION
4.1 Single Step - 50 mm (2”) Step Height:
1. Turn one step section upside down and lay at.
2. Push the four support pillars into position (see
Figure 1).
Figure 1: Insert Support Pillars
3. Turn the step over to stand on the pillars and
place in the desired location.
4.2 Two Steps - 75 mm (3”) Step Height:
1. Turn one step section upside down and lay at.
2. Push the four support pillars into position (see
Figure 1).
3. Place an additional step section on top of the
rst.
4. Push down rmly to secure.
4.3 Three Steps - 100 mm (4”) Step Height:
1. Place an additional step section on top of the
top step section.
2. Push down rmly to secure.

NRS Healthcare M11077 Specifications

General

Brand	NRS Healthcare
Model	M11077
Category	Mobility Aid
Language	English

Summary

General Safety Warnings

Maximum User Weight Limit

The maximum user weight must not exceed 317 kg (50 st).

Maximum Step Height

The maximum step height is 175 mm (7") using 6 step sections (2 packs).

Stacking Limit

Do not stack more than 6 step sections together.

Base Support Pillar Requirement

Ensure the bottom section of the step has 4 support pillars inserted into the base.

Intended Use

Safety Precautions

Contents

Lists included items: Step sections and support pillars.

Assembly and Installation

Single Step Assembly (50 mm Height)

Instructions for assembling a single step section with support pillars for 50mm height.

Two Step Assembly (75 mm Height)

Instructions for assembling two step sections for 75mm height.

Three Step Assembly (100 mm Height)

Instructions for assembling three step sections for 100mm height.

Multi-Step Sequence Assembly

Instructions for assembling multiple step sections in sequence for greater height.

Maintenance and Cleaning

Maintenance

Check support pillars and sections for secure fit and signs of wear or damage.

Cleaning Instructions

Clean with neutral detergent and water; can be autoclaved up to 80°C.

Accessories, Disposal, and Guarantee

Accessories & Spare Parts

Information on ordering spare support pillars (M24345).

Product Disposal

Product is plastic, dispose via local waste centres or trade collectors.

Product Guarantee

24-month guarantee against faulty materials/workmanship for domestic use.