NSI Tork E101B User Manual

PROGRAMMING INSTRUCTIONS
E101B
E101PB
E103B
LI-883(C)
OVR
E , EW, E-PB SERIES TIMER FACE/BUTTONS
EWZ TIMER FACE/BUTTONS
DEL
PREV
HOUR
MONTH
MIN
DATE
SEC/DAY
YEAR
EVENT
RESET BUTTON
ENTER
MODE
OVR
DEL
PREV
HOUR
LATITUDE
MONTH
MIN
DATE
SEC/DAY
YEAR
EVENT
ENTER
MODE
RESET BUTTON
E120B
E201B
When powering up the unit for the first time, allow 1-2 minutes to charge
the supercap. The unit is ready when "12:00 AM" flashing is displayed on
screen. Press reset button after 2 minutes if screen is blank.
1.0 PRESS MODE TO GO TO THE CLK MODE.
2.0 TO SET CLOCK
3.0 TO SET DATE
4.0 AUTOMATIC DAYLIGHT SAVING TIME ADJUSTMENT
5.0 SETTING AN ON TIME
5.1 SETTING AN OFF TIME
5.2 NEXT SCHEDULE
Repeat steps 5.0 & 5.1 for additional ON/OFF pairs OR
6.0 AUTO (AUTOMATIC) MODE
NOTE: AUTO mode will follow the programmed schedule. OVR sets ON/OFF
until the next event.
7.0 MAN (MANUAL) MODE
NOTE: MAN mode will bypass programmed schedule. OVR set ON/OFF until
next OVERRIDE push.
NOTE: Press RESET with an insulated tool to clear time and date. To clear all,
press ENTER, press EVENT, then press ENTER again.
MODE
MODE
CLK
AM
DATE
SA
:
SU
ON
OFF
SCH
ON
SCH
OFF
PM ASTRO ON
ASTRO ON
M T W TH F SA SU
AM ASTRO
M T W TH F SA SU
OFF
OFF
ASTRO
M T W TH F SA SU
ASTRO
T
AM ON
MAN
T
AM ON
To accept
MODE
CLK
AM
DATE
SA
:
SU
ON
OFF
SCH
ON
SCH
OFF
PM ASTRO ON
ASTRO ON
M T W TH F SA SU
AM ASTRO
M T W TH F SA SU
OFF
OFF
ASTRO
M T W TH F SA SU
ASTRO
T
AM ON
MAN
T
AM ON
To remove
ENTER
DELETE
CLK
AM
DATE
SA
:
SU
ON
OFF
SCH
ON
SCH
OFF
PM ASTRO ON
ASTRO ON
M T W TH F SA SU
AM ASTRO
M T W TH F SA SU
OFF
OFF
ASTRO
M T W TH F SA SU
ASTRO
T
AM ON
MAN
T
AM ON
HOUR
MIN
ENTER
CLK
AM
DATE
SA
:
SU
ON
OFF
SCH
ON
SCH
OFF
PM ASTRO ON
ASTRO ON
M T W TH F SA SU
AM ASTRO
M T W TH F SA SU
OFF
OFF
ASTRO
M T W TH F SA SU
ASTRO
T
AM ON
MAN
T
AM ON
ENTER
YEAR
DATE
MONTH
HOUR
MIN
EVENT
FOR E201B
ENTER
CH1/CH2
HOUR
MIN
FOR E201B
ENTER
CH1/CH2

NSI Tork E101B Specifications

General

Brand	NSI
Model	Tork E101B
Category	Timer
Language	English