Need help?Do you have a question about the NSI TORK TU40 and is the answer not in the manual?
Illustrates single-pole, single-throw wiring for loads matching timer supply voltage.
Shows double-pole, single-throw wiring for loads matching timer supply voltage.
Depicts two-circuit, single-pole, single-throw wiring for loads matching timer supply voltage.
Lists key characteristics and functionalities of the time switch.
Details the output capabilities and types of contacts available.
Provides specific current and voltage ratings for the switch contacts.
Specifies the operational temperature range and power consumption.
Outlines prerequisites and procedures for installing the unit safely.
Illustrates the wiring connection for 120/277VAC power supply applications.
Shows the wiring connections for 208-240VAC power supply applications.
Explains how to set ON/OFF times using the timer's tabs and dial.
Describes how to manually control the load by overriding the set schedule.
To Next Page
General