Reversible vibratory plates Operating instructions
side 26 edition 06/2009
7. MAINTENANCE SCHEDULE
The Maintenance Schedule includes only the most important operations. Other maintenance operations and repairs beyond this Schedule should be
carried out depending on the operating conditions and according to the engine operating instructions. CAUTION: Switch the engine off before any
maintenance operation. Use the original spare parts only otherwise the vibration plate can be damaged and the respective complaint will not
be recognized by the manufacturer.
Maintenance Schedule for Engines HONDA GX
After the first month or
after the first 20 hours
of operation
Every 3 months or after
every 50 hours of
operation
Every 6 months or
after every 100
hours of operation
Every year or every 250 hours of operation (2)
Every year or every 300 hours of operation (2)
Frequency adjustment
Exchange of ooil
Every year or every 300 hours of operation (2)
Every year or every 300 hours of operation (2)
Inspection for tensioning,
inspection of pulleys and clutch
1) If the engine is operated in a dusty environment, the maintenance operations should be more frequent.
2) These maintenance operations should be carried out by a NTC serviceman or by an authorized service centre depending on the engine
type, especially if the user does not have sufficient knowledge or tools.
To Next Page
Loading...
