To Next PageTo Next Page
Need help?Do you have a question about the NTI FTV150C and is the answer not in the manual?
Details essential steps before applying power to plastic vented boilers.
Describes options for terminating direct vent installations, including sidewall and rooftop.
Illustrates various sidewall termination configurations for direct vent systems.
Shows different roof termination options for direct vent installation.
Covers essential rules and guidelines for venting, including separation, sloping, and support.
Crucial safety instructions to read before attempting to operate the boiler.
Step-by-step guide for safely starting up and operating the boiler.
Instructions for safely shutting off the gas supply to the boiler.
Provides instructions for safely turning off the boiler.
Details the procedure for measuring and verifying gas line pressure for the boiler.
Explains how to adjust the throttle/input screw for burner operation and flue gas analysis.
Outlines the procedure for calibrating burner operation using a combustion analyzer.
Describes the mandatory flue gas analysis and adjustment for propane-converted boilers.
Emphasizes the importance of water quality for boiler operation and lifespan, and provides best practices.
Outlines water parameters to test and permitted ranges to maintain warranty.
Covers near boiler plumbing requirements for central heating systems.
Discusses boiler system plumbing configurations, minimum flow rates, and pump outputs.
Explains where and how to make field wiring connections to the boiler's control panel.
Lists essential steps to be completed before starting up the boiler.
Provides steps for initial boiler start-up after installation.
Lists checks to verify proper boiler operation after start-up.
A checklist of annual inspection items to ensure safe and efficient boiler operation.
Details the procedure for cleaning the combustion chamber, including safety precautions.
A step-by-step checklist for cleaning the combustion chamber and related components.
Step-by-step guide on adjusting settings within the Installer Menu.
Details installer menu settings for firing rates, service reminders, cascade functions, and unit selections.
Describes how lockouts are indicated, cleared, and accessed for troubleshooting.
Explains how blocking errors are indicated, their impact on operation, and how they are cleared.
Indicates low water pressure and actions to resolve it.
Details checks for ignition errors (Loc 1), including wiring, gas pressure, and flame sensor.
Describes issues with water pressure readings and sensor checks.
Indicates low water pressure and actions to resolve it.
Steps to diagnose why the boiler is not operating, starting with a blank display.
Troubleshooting steps when the display is normal but no heat is delivered to radiators.
Troubleshooting steps when the boiler operates but provides no domestic hot water.
Steps to diagnose and resolve DHW temperature issues.
General
