EasyManuals Logo

Nu-Tek CT2200 User Manual

Default Icon
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
StimRehab
The StimRehab is equipped with two or four completely identical electrotherapy channels.
The electrotherapy channels can be used in combination (linked) or totally independent. A
comprehensive set of current waveforms is available, targeting both pain management and
muscle stimulation applications.
Protocols can run on linked or independent channels. With independent channels two or
four different protocols can be performed simultaneously.
UltraRehab
The UltraRehab is an ultrasound therapy device. The device provides two positions for
attachment of an ultrasound applicator. Depending on the device configuration ordered,
the UltraRehab comes with an applicator with a large contact area, an applicator with a
small contact area or with both applicators. The applicators can operate in continuous or
pulsed mode at an ultrasound frequency of 1 MHz or 3 MHz. The lower frequency (1 MHz)
penetrates deeper than a higher frequency (3 MHz), thus the practitioner can decide which
frequency to use according to the condition and depth to be treated. Contact control sus-
pends the application of ultrasonic energy when acoustical contact with the treatment area
becomes insufficient. The applicators are suitable for subaqual treatments.
ComboRehab
The ComboRehab is a combination device, combining the functions of the StimRehab and
the UltraRehab in a single device. With the ComboRehab the simultaneous application of
ultrasound and electrotherapy (combination therapy) is also possible. The remaining elec-
trotherapy channel can then be used independently.
VAM200
Electrotherapy can be applied through standard or vacuum electrodes. With vacuum elec-
trodes the VAM200 generates the vacuum through which the vacuum electrodes are
attached to the patient. The device is placed beneath the StimRehab or ComboRehab, from
which its power is derived and through which it is also operated.
MTM200
The MTM200 is a two channel electrotherapy module intended to upgrade the StimRehab
and ComboRehab to Four Channel Electrotherapy or Combination Therapy Systems. This
4
Rehab-Series

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nu-Tek CT2200 and is the answer not in the manual?

Nu-Tek CT2200 Specifications

General IconGeneral
BrandNu-Tek
ModelCT2200
CategoryMedical Equipment
LanguageEnglish

Related product manuals