NTNV 67691 - 31
ELECTRIC WARMER & STERILIZER
IMPORTANT SAFETY INFORMATION
BOTTLE WARMING INSTRUCTIONS
1. When ready to begin, insert plug into wall outlet. Preheating is not necessary.
Intended for use by adults only.
When using this or any other electrical product, basic safety precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING
- This appliance has a polarized plug (one blade is wider then the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in
any way.
- a) A short power-supply cord (or short detachable power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over
a longer cord.
b) Extension cords (or longer detachable power-supply cords) are available and may be used if care is exercised in their use.
c) If an extension cord (or long detachable power-supply cord) is used:
1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating
of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord; and
3) The longer cord should be arranges so that it will not drape over the countertop or tabletop
where it can be tripped over, snagged, or pulled on unintentionally (especially by children).
- Connect to properly grounded outlets only. To protect against electric shock, do not immerse the appliance, cord or plug in water or any liquid. Clean unit
with damp cloth only.
- If there is any visible damage to the appliance, disconnect immediately and do not use. The appliance does not contain any user serviceable parts. Repairs
should be done by qualified personnel. Do not dismantle.
- For household use only. Do not use outdoors.
- Appliance should be placed on a flat and stable area away from hot surfaces. Do not let cord hang over edge of table or counter, or touch a hot surface.
- Do not move appliance when it is in use or if it contains hot water.
- Warming chamber becomes hot. Do not touch hot surfaces. Open using handle on top of lid only. DO NOT OPEN LID WHEN IN USE.
- Pour out excess water and unplug appliance when not in use or before cleaning or storing.
- Make sure that the heating guidelines are followed to ensure that the food is not heated for too long.
- For your child’s safety-Always check food temperature before feeding by testing on a sensitive part of your skin.
- Use plastic bottles approved for boiling or glass thermo-resistant bottles / containers with this appliance.
- Allow to cool before placing or removing basket and before cleaning.
- Do not operate any appliance with a damaged cord or plug after the appliance malfunctions or has been damaged in any manner. Return appliance for
examination, repair or adjustment.
- Always use lift-out basket to prevent damage to bottles, food jars, etc.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always make sure unit is “off” before removing plug from wall outlet.
- Do not use appliance for anything other than its intended use.
- Before serving, unplug cord from wall outlet. Do not leave cord or the unit within child’s reach. Unplug from outlet when not in use and before cleaning.
- Close supervision is necessary when any appliance is used near children.
WARNING - Failure to follow these instructions may cause scalding or damage to product.
SAVE THESE INSTRUCTIONS
To warm baby’s bottle or food, follow these instructions and the water charts (pg.47-48).
Note: These instructions are to be used as a guide only. Please note that there are many variables, such as size of the bottle and starting temperature of the
food, which can impact warming time and final temperature of the bottle or jar.
Adjustments to the instructions below may be necessary. Always test the temperature of food or liquid before feeding baby.
2
3
4
5
2. ADD the amount of
water as advised by the
chart (pg.41) for intended
size of bottle. Then pour
water directly into the
warmer basin.
3. Place frozen*, refriger-
ated, or room temperature
bottle in lift-out basket.
Always use this basket to
prevent damage to bot-
tles. Do not use unit lid.
4. Press down the
POWER button to turn your
warmer ON. The button
will light up ORANGE.
5. The size of the bottle
and how much water is
used will determine the
time it takes to warm
the bottle. The unit will
shut off when the water
runs out.
WARNING: Beware of hot
steam from the warming
basin; do not put your
hands or face in or around
the warming basin during
or immediately after
warming.
To Next Page
Loading...
