Need help?Do you have a question about the NUCOUN VC-3 and is the answer not in the manual?
Essential safety guidelines for operating the banknote counter and avoiding potential hazards.
Guidance on proper placement and setup of the banknote counting machine for optimal performance.
Details on the included components and the main unit of the value counter.
Visual overview of the front and back interfaces of the machine, identifying key components.
Specifications and performance metrics of the VC-3 value counter, including dimensions and capabilities.
Step-by-step guide for powering on, and loading banknotes correctly for counting.
List of error codes and their corresponding reasons for troubleshooting common issues.
Overview of the display interface and operation of the machine's function keys.
Configuration of automatic or manual start modes for initiating banknote counting.
Options for selecting different counting methods like MIX, SORT, and CNT.
Details on Mix, Sorting, Piece Count, Multi-country Mix, and Auto Recognition modes.
Adjusting the counting speed from Low (800pcs/min) to High (1200pcs/min).
Reviewing detailed results of denomination counts and totals after counting.
Configuring the machine to count a specific number of banknotes for batching.
Enabling or disabling the accumulation of counts across multiple counting sessions.
Adjusting sensitivity levels for detecting counterfeit banknotes (Low, Middle, High).
Setting the current date and time on the machine for accurate logging.
Configuring buzzer alerts and viewing the installed software version.
Accessing counting history and restoring machine settings to factory defaults.
Instructions for connecting and configuring an external serial printer.
Steps for connecting the machine to a computer to transfer counting data.
Guide for using PC software to collect and view counting data from the machine.
Connecting and using an external display unit with the banknote counter.
Steps for updating the machine's firmware via USB drive for improved functionality.
Procedures for cleaning sensors and components to ensure accurate counting.
Diagnosing and resolving common operational issues and error codes displayed by the machine.
General| Stacker Capacity | 200 notes |
|---|---|
| Display | LCD |
| Weight | 5.5 kg |
| Counting Speed | 1000 notes/min |
| Counterfeit Detection | UV, MG, IR |
| Power Supply | AC 50/60Hz |
To Next Page
