NUCOUN VC-7 - User Manual

Summary

Machine Overview

Safety Instruction

General safety precautions and warnings for using the value counter, including prohibitions and user responsibilities.

Installation Instruction

Guidelines for proper machine placement, including required clearance for operation and maintenance.

Technical Parameters

Start-up

Steps to power on the machine and initiate the self-check and startup sequence.

Notes Placement

Counting Error Code

Lists common error codes displayed by the machine and their corresponding reasons for troubleshooting.

Function Introduction

Manual;Automatic Setting

Selection of Counting Mode

Guide to selecting counting modes: Single Currency, Mix, Count, Sorting, and Automatic Recognition, including accumulation functions.

Counting Speed Setting and Function Description

Batch Setting

How to set a specific number of banknotes for batch counting, including default presets and custom number setting.

Check counting details on Machine

Counterfeit Detection Setting

How to adjust counterfeit detection levels (High, Middle, Low) for enhanced security.

Restore Factory Setting

Introduction of uploading the counting data

Serial cable connection

Machine Setup

Data collection PC software

How to install and use the PC software for collecting and managing counting data.

Maintenance Instruction

Software Upgrade

Daily Clean instruction

Common Faults and Corresponding Descriptions

Lists common error codes and their meanings for troubleshooting operational issues and malfunctions.

NUCOUN VC-7 Specifications

General

Brand	NUCOUN
Model	VC-7
Category	Cash Counter
Language	English