3
BEFORE USING YOUR ATTACHMENT
1. Always firmly press the attachment release button on
the back of the device to remove or fasten the treatment
attachment. Refer to #6 in the “Getting To Know Your
Device” section. Guide the attachment in place (as
pictured to the right), and then release the button
to secure the attachment to your
Trinity device.
2. Test your skin to make sure you are
not sensitive to the NuFACE primer
(sold separately). Rub a dime-sized
amount of the primer on your forearm
and leave for 15–30 minutes before
washing off. If an allergic reaction
develops within 24 hours, you should
not use the device and/or treatment
attachments in conjunction with the
NuFACE primer. Immediately consult
the Carol Cole Company for an alternate
conductive medium.
3. Before and after your treatment, take a photo of your
clean face/problem areas in a well-lit room. Every eight
weeks, take another photo and compare results.
To Next Page
Loading...
