EasyManua.ls Logo

NuFlo Barton 202E User Manual

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BarBar
BarBar
Bar
tonton
tonton
ton
®®
®®
®
MODEL 202E
DIFFERENTIAL PRESSURE RECORDERS
User Manual
Manual No. 10060, Rev. B
05/2004
CONTENTS
Section 1 - Introduction ................................................................. Page 1
Pressure Elements/Chart Drive Tables ..................................... Page 5/6
Section 2 - Installation/Calibration Check ................................... Page 7
Section 3 - Maintenance & Calibration ........................................ Page 13
Section 4 - Troubleshooting ........................................................... Page 26
Section 5 - Installation Drawings .................................................. Page 28
Section 6 - Parts Drawing/List ....................................................... Page 34
Specification (DPU/Instrument)................................................... Page 39
SECTION 1 - INTRODUCTION
General
The Barton
®
Model 202E single DP Flow Recorders measure and record system
operation parameters including gas and liquid flow rate, liquid level in a vessel,
and other system variables that can be measured by differential pressure and
static pressure methods.
Main Components
Differential Pressure Unit
The Barton
®
Model 199 Differential Pressure Unit (DPU) actuates the recorders.
The DPU is a dual bellows assembly enclosed within pressure housings. The
bellows are liquid filled and withstand overranges equal to the working pressure
of the housing without calibration change. Movement of the bellows is transmit-
ted through a torque tube from the DPU to the recording mechanism. The
torque tube is hermetically sealed to eliminate friction and leakage; it does not
require lubrication.
Before installing this instrument, become familiar with the installation instructions
in Section 2. WARNING notes that appear on the following pages of this manual
should be reviewed before proceeding: 8, 20, 21, 22, and 25.
SAFETY !
WARNING notes indicate the presence of a hazard which can cause severe personal injury, death, or substantial
property damage if warning is ignored.
CAUTION notes indicate the presence of a hazard which can cause moderate personal injury or property
damage if warning is ignored.
Question and Answer IconNeed help?

Do you have a question about the NuFlo Barton 202E and is the answer not in the manual?

NuFlo Barton 202E Specifications

General IconGeneral
BrandNuFlo
ModelBarton 202E
CategoryData Loggers
LanguageEnglish

Summary

SECTION 2 - INSTALLATION/CALIBRATION CHECK

Calibration Check

Differential Pressure Pen

Steps for calibrating the DP pen.

Static Pressure Pen

Steps for calibrating the SP pen.

Recorder Mounting

Startup

Perform a zero check on the instrument

Procedures for setting the zero point.

SECTION 3 - MAINTENANCE AND CALIBRATION

Differential Pressure Pen Calibration

Detailed steps for DP pen calibration.

Adding Counterweight to #2 Pen (DP)

Calibration

Recalibration procedures after adding counterweights.

Static Pressure Pen Calibration

Static Pressure Element Replacement

Chart Drive Replacement

Linkage Adjustments

Overrange Stops Adjustment

DPU Replacement

DPU Cleaning and Inspection

Pressure Check Procedure

Safety procedure before DPU disassembly.

Range Change

2-1/8-Inch Diameter Bellows

Range change for 2-1/8" bellows assembly.

3-3/4-Inch Diameter Bellows Without Kickoff Spring

Range change for 3-3/4" bellows without kickoff spring.

Setting Bellows Travel

Bellows Unit Assembly (BUA) Replacement

SECTION 4 - TROUBLESHOOTING

Recorder Troubleshooting Table

Table listing recorder problems and solutions.

DPU Troubleshooting Table

SECTION 6 - PARTS DRAWING/LIST

202E Parts List

199 DPU Parts Drawing

199 DPU Parts List

199 DPU Specifications

Product Warranty