Nuga E5 - Main Body Overview

 
E5
- Main body
9 10
1 2 3 4 5 6
15 16 17
11 12 13 147 8
18 19 20
It controls the CH1 low frequency intensity.
It controls the output intensity of the low frequency.
It is a display unit (FND) for displaying the CH1
output intensity.
It is an LED for displaying the M1 operation state
It sets the M1 operation.
It is a display unit (FND) for displaying the auto mode
of the low frequency.
It sets the auto mode of the low frequency.
It is a display unit (FND) for displaying the operation
time of the low frequency.
ⴘ Low frequency auto mode display
unit (FND)
ⴙ Low frequency auto mode button
ⴚ Low frequency output intensity
control button
It sets the operation time of the low frequency
ⴜ Low frequency operation time
setting button
⴦ C H1 output intensity controlling button
Name Function
ⴛ Low frequency operation time display
unit (FND)
CH1 output intensity display unit (FND)
It controls the CH2 low frequency intensity. CH2 output intensity controlling button
ⴢ M1 operation display LED
It is an LED for displaying thermal function setting.
ⴠ
Thermal function setting display LED
ⴡ Thermal function start/stop and
temperature setting button
ⴟ Low frequency start/stop button
ⴞ Low frequency output display unit
ⴤ M2 operation button
ⴥ M2 operation display LED
CH2 start/stop button
CH2 output intensity display unit (FND)
It is a display unit (FND) for displaying the CH2
output intensity.
It starts/stops the CH2 operation.
It sets the M2 operation.
It is an LED for displaying the M2 operation state
It is a display unit (FND) for displaying the output
intensity of the low frequency.
ⴝ Controller Signal Receiving Sensor
It is an input unit where the signal for product
operation is input from the controller.
It starts / stops the operation of the low frequency.
It turns on/off the power and sets the temperature.
ⴣ M1 operation button
It is a main body power switch (Main body turn-on/off)
It connects the power cord.
Main body power switch
CH2 output terminalCH2 output terminal
CH1 output terminalCH1 output terminal


It starts/stops the CH1 operation.CH1 start/stop button






Power cord connection unit

Product Introduction
ON
Power
OFF
23 2422
21
CH2 CH1