Numan Drive - Bluetooth Connection

32
BT CONNECTION
1. Turn the SOURCE/SPEAKER knob on the front panel of the unit, or press the buttons INPUT UP/DOWN of
the remote control until the BT indicator lights up.
2. After a few seconds, the BT LED will ash. This means that the unit is in search mode and can detect other
BT units.
3. Activate BT on the mobile device you want to connect to the amplier. The device is displayed in the device
list of the mobile device as „NUMAN Drive“. Select this from the device list to establish a connection.
4. If you need to enter a password, enter „0000“ to agree to the connection.
5. After the connection has been successfully established, the BT LED will light permanently white and stop
ashing.