DJ18
SPECIFICATIONS...
INPUTS:
Line:10kΩ input impedance
80 mV rms sensitivity (for 1.22 V output)
Mic: 10kΩ input impedance balanced/unbalanced
2.5 mV rms sensitivity (for 1.22 V output)
500 mV rms max input
Phono:47kΩ input impedance
1.5 mV rms sensitivity @ 1 KHz (for 1.22 V output)
OUTPUTS:
Line: 9V rms max (+20 dBm)
Headphone Amp: .5 watt into 47Ω
Distortion less than .01%
EQUALIZER:
5-Band Stereo Graphic EQ
Band centers 63Hz, 250Hz, 1KHz, 4KHz, 16KHz +/- 12 dB
SIGNAL TO NOISE RATIOS (vs. maximum output):
Line: Better than 85 dB
Mic: Better than 72 dB
Phono: Better than 83 dB
FREQUENCY RESPONSE:
Mic: 20 Hz- 15k Hz +_ .5 dB
Line: 20 Hz- 20k Hz +_ .5 dB
Phono: +_ 1 dB except for controlled attenuation of -3 dB
@ 20 Hz to reduce rumble and feedback
TALKOVER ATTENUATION:
variable from no cut to -16 dB
POWER CONSUMPTION:
20 Watt typical, 28 Watt with full headphone output
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 14 http://www.numark.com
To Next Page
Loading...
Need help?
General
