Numark DM1295 - Specifications

DM1295
- The Leader in DJ Technology
©2000 Industries - 10 - http://www.numark.com
SPECIFICATIONS
INPUTS:
Line: 10Kohm input impedance
110mV rms sensitivity (for 1.22V output)
Mic: 10Kohm input impedance unbalanced
1.6 mV rms sensitivity (for 1.22V output)
500mV rms max input
Talkover attenuation: variable from no cut to -16 dB
Phono: 47Kohm input impedance
1.8mV rms sensitivity @ 1 KHz (for 1.22V output)
OUTPUTS:
Line: 9V rms max
Headphone Amp: 1V rms watt into 16ohm
Distortion: less than 0.01%
SIGNAL TO NOISE RATIOS* (vs. maximum output):
Line: Better than 96 dB
Mic: Better than 78 dB
Phono: Better than 87 dB
*JIS - weighted
FREQUENCY RESPONSE:
Line: 20 Hz- 22k Hz ±0.5 dB
Line: 20 Hz- 20k Hz ±0.5 dB
Phono: ±1 dB except for controlled attenuation of -3 dB
@ 20 Hz to reduce rumble and feedback
EQUALIZER:
6-Band Stereo Graphic EQ
Band centers 42 Hz, 152 Hz, 480Hz, 1.52KHz, 4.8KHz, 15.36KHz +/- 15 dB
SAMPLER:
Sampling length: 110 Seconds, 27.5 seconds per bank
POWER CONSUMPTION:
20 Watt typical, 28 watt with full headphone output
DIMENSIONS:
482mmx232mmx111mm
19” x9 1/8” x4 3/8”
WEIGHT: 5.1kgs 11.2lbs