Numark DM2000X - Specifications

DM2000X
SPECIFICATIONS...
Inputs:
Line: 10Kohm input impedance
100mV rms sensitivity (for 1.22V output)
Mic: 10 Kohm input impedance unbalanced
3mV rms sensitivity (for 1.22V output)
50mV rms max input
Phono: 47Kohm input impedance
1.5mV rms sensitivity @ 1KHz (for 1.22V output)
Outputs:
Line: 9V rms max (+20dBm)
Headphone: 0.5W into 47ohm
Distortion: less than 0.01%
Signal to Noise Ratio (vs. maximum output)
Line: Better than 90dB
Mic: Better than 84dB
Phono: Better than 80dB
Frequency Response:
Mic: 20Hz - 15 KHz +/-0.5dB
Line: 20Hz - 20 KHz +/-0.5dB
Phono: +/- 1dB except for controlled attenuation of -3dB
@ 20Hz to reduce rumble and feedback
Channel EQ:
Bass: +15/-30 dB @ 40 Hz
Middle: +15/-30 dB @ 1.36 KHz
Treble: +15/-30 dB @ 20 Hz
Power Consumption:
15 watt typical, 18 watt with full headphone output
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries 10 http://www.numark.com