SPECIFICATIONS
INPUTS
Line: 10 kΩ input impedance
90 mV rms sensitivity for 1.22 V output
Phono: 47 kΩ input impedance
1.1 mV rms sensitivity @ 1 kHz for 1.22 V output
Mic: 600 Ω input impedance unbalanced
1.15 mV rms sensitivity for 1.22V output
67 mV rms max input
OUTPUTS
Line: 7.35 V rms max
Headphone: 0.5 W into 47 Ω
DISTORTION
< 0.01%
SIGNAL-TO-NOISE RATIO (maximum output; JIS-A weighted)
Line: > 97 dB
Phono: > 81 dB
Mic: > 96 dB
FREQUENCY RESPONSE
Line: 20 Hz – 20 kHz (±0.5 dB)
Phono: ±1 dB except for controlled attenuation of -3 dB @ 20 Hz to reduce rumble and feedback
Mic: 20 Hz – 15 kHz (±0.5 dB)
CHANNEL EQUALIZER
Treble: +10 / -28 dB @ 15 kHz
Bass: +12 / -32 dB @ 60 Hz
MIC EQUALIZER
Treble: +/-12 dB @ 15 kHz
Bass: +/-12 dB @ 100 Hz
POWER CONSUMPTION
3.7 W typical
6.3 W with full headphone output
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
To Next Page
Loading...
