3
INTRODUCTION
Welcome to the M2 professional 2-channel mixer. Here are some of the features that you will come to love about
your new M2:
2 Line inputs for connecting CD players, samplers, or other line-level devices
2 switchable Phono / Line inputs
3-band EQ on each input channel
1 microphone input with Gain and EQ controls
1 headphone output with Cue Blend slider
Professional crosssfader with slope adjustment and reversible channel assignments
Master & Record outputs
We hope that the M2 serves you well for many years to come.
Sincerely,
The People of Numark
BOX CONTENTS
M2
AC Power Adapter
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your M2. Registering your product ensures that we can keep you
up-to-date with any last-minute product developments and provide you with world-class technical support, should you
run into any problems.
GROUND RULES
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order.
• Audio input sources (i.e. turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices
10. When turning off, always reverse this operation by,
• Turning off amplifiers
• Mixer
• Last, any input devices
To Next Page
Loading...
Need help?
General
Weight and Dimensions
