SPECIFICATIONS
INPUTS:
Line: 10 kΩ input impedance
77 mV rms sensitivity for 1.22 V output
Mic: 600 Ω input impedance unbalanced
1.1 mv rms sensitivity for 1.22 V output
60 mV rms max input
Phono: 47 kΩ input impedance
1.3 mV rms sensitivity @1 kHz for 1.22V output
OUTPUTS:
Line: 6.7 V rms max
Headphone: 0.5 W into 47 Ω
DISTORTION: < 0.01%
SIGNAL-TO-NOISE RATIO (maximum output, JIS-A weighted):
Line: > 96 dB
Mic: > 94 dB
Phono: > 79 dB
FREQUENCY RESPONSE:
Line: 20 Hz – 20 kHz (± 0.5 dB)
Mic: 20Hz – 15KHz (± 0.5 dB)
Phono: ±1 dB (except for controlled attenuation of -3dB @ 20Hz to reduce
rumble and feedback)
MICROPHONE TALKOVER: -15 dB
CHANNEL EQUALIZER:
Bass: +12/-32 dB @ 60 Hz
Middle: +12/-32 dB @ 1.2 kHz
Treble: +10/-28 dB @ 15 kHz
DJ MIC EQUALIZER:
Bass: ±12 dB @ 100 Hz
Middle: ±10 dB @ 1.2 kHz
Treble: +12 dB @ 15 kHz
POWER CONSUMPTION: 9.1 W typical
11.6 W with full headphone output
* Specifications are subject to change
MANUAL VERSION 1.0
To Next Page
Loading...
