Numark MIXTRACK PLATINUM FX - Cue Mix

4.
Cue Mix:
Adjusts the audio output to the headphones, mixing
between the cue output and the master mix output.
5.
Cue Gain:
Adjusts the volume for headphone cueing.
6.
Master Output LEDs: Displays the audio level going
to the Master Output.
7.
Load:
Press one of these buttons while a track is selected
to assign it to Deck 1 or 2, respectively. Quickly
double press a Load button to assign the same track
on both decks.
Eject Deck
Removes the track from related
deck.
8.
Level: Adjusts the pre-fader, pre-EQ audio level of
the corresponding channel.
9.
High EQ: Controls the treble frequencies for the
individual channels
10.
Mid EQ:
Controls the mid-range frequencies for the
individual channels.
11.
Low EQ:
Controls the bass frequencies for the individual
channels
12.
Filter:
Adjusts the amount of the filter effect. Turning the
knob left and right will produce a lowpass filter and
high-pass filter, respectively.
13.
Cue/PFL:
Sends pre-fader audio to the cue channel for
headphone monitoring.
Slip Mode (On/Off)
Toggles slip mode on/off for
related deck.
14.
Channel Fader:
Adjusts the volume of the individual channels in the
software.
15.
Crossfader:
Controls the blend between the two decks.