Numark MIXTRACK PLATINUM FX - Page 7

24.
Platter/Jog Wheel:
This capacitive, touch-sensitive jog wheel controls
the audio when the wheel is touched and moved.
When the Scratch button is not active, use the jog
wheel to bend the pitch of the track. When the
Scratch button is active, use the jog wheel to grab
and move the audio, "scratching" the track as you
would with a vinyl record. You can also grab the
non-touch-sensitive outer wheel, to bend the pitch
of the track.
Scrub Scroll
Scrub Scrolling while holding Jog
wheel.
25.
Deck Display:
1. Active Deck: Indicates the currently active deck.
2. Platter Position: Displays the current track position.
3. BPM: Displays the current BPM for the selected track.
4. Keylock: This icon illuminates when Keylock is active for the current deck.
5. Pitch Range: Shows the current pitch range.
6. Pitch: Shows current pitch of the track.
7. Pitch Adjust: Indicates the direction to move the Pitch Fader to match the current
track’s BPM with the track on the opposite deck.
8. Time Remaining: Displays the time elapsed or time remaining for the current track.
9. Time Bars: provides visual reference to time remaining on the selected song. When
the song is almost over these segments will flash to give a warning.
26.
Scratch:
Press this button to turn on the scratch feature for
the jog wheel. Hold Shift and press this button to
select which Layer in the software is controlled by
that hardware Deck. Deck 1 can control Layer 1 or
3; Deck 2 can control Layer 2 or 4.
Deck Select:
Selects deck 3 & 4 for 4 deck
mixing
27.
Shift:
Allows multiple control commands to be triggered
when pressed first along with other buttons.