Numark MONTEREY 3-SEAT SWING/DAYBED - Step 3: Installing Long Top Crossbars; Step 4: Attaching Short Top Crossbars

4
(E) x 4
(L) x 4
3
Assembly instruction
(G) x 4
(J) x 4
4
(L) x 8
(L)
(L)
(G)
(J)
(5)
(4)
(1)
(4)
(4)
(E)
(L)
Insert two long top crossbars (4) into the holes at the top of each leg. Line up the holes.
For each hole insert an bolt (E) through an metal washer (L), through the leg, and secure
into the long top crossbar (4). Do not tighten completely. Repeat procedure for the other
long top crossbar.
Fix a short top crossbar (5) onto the long top crossbar (4). Make sure the U-shaped brackets
of the short top crossbar (5) are facing down. Line up the holes, for each hole insert an
bolt (G) through an metal washer (L), through the long top crossbar (4), short top crossbar (5),
(the bracket of the short top crossbar (5)), and another metal washer (L), then secure with
an nut (J). Do not tighten completely. Repeat procedure for the other side.