Numark MONTEREY 3-SEAT SWING/DAYBED User Manual

1
MONTEREY COLLECTION 3-SEAT SWING/DAYBED
ASSEMBLY INSTRUCTIONS
088-1517-8 (SC-392GS)
Please read and understand this manual before any assembly. Before
beginning assembly of product, make sure all parts are present.
Compare parts with packaging contents list. IF any part is missing,
or if you have any questions, contact the vendor’s customer
service department at 1-877-729-8315.

Numark MONTEREY 3-SEAT SWING/DAYBED Specifications

General

Brand	Numark
Model	MONTEREY 3-SEAT SWING/DAYBED
Category	Baby Swing
Type	Swing/Daybed
Seating Capacity	3

Summary

Monterey Collection 3-Seat Swing/Daybed Assembly Instructions

Packaging Content

Lists all parts and quantities required for assembly.

Step 1: Attaching Legs to U-shaped Brackets

Secures leg tops to U-shaped brackets using bolts and nuts.

Step 2: Attaching Side Panels to Legs

Connects side panels to legs using bolts and washers, ensuring correct orientation.

Step 3: Installing Long Top Crossbars

Inserts and secures long top crossbars to the legs with bolts and washers.

Step 4: Attaching Short Top Crossbars

Connects short top crossbars to long top crossbars using bolts, washers, and nuts.

Step 5: Securing Rear Leg Crossbar

Attaches the rear leg crossbar between side panels using bolts and washers.

Step 6: Assembling Seat Support Bars

Connects seat support bars to arms, ensuring front labels face correctly.

Step 7: Attaching Seat and Back Assembly

Connects the seat and back assembly to the frame arms using bolts, washers, and nuts.

Step 8: Fastening Back Support Tube

Fastens the back support tube's U-shaped bracket to the rear seat support bar.

Step 9: Hanging Seat Assembly

Attaches hanging bars to arms and then to S-hooks on the short top crossbar.

Step 10: Assembling Canopy Frame

Inserts canopy frame bars into the large canopy frame.

Step 11: Integrating Small Canopy Frame

Inserts the small canopy frame into the large canopy frame.

Step 12: Securing Small Canopy Bars

Secures small canopy frame bars using bolts and washers.

Step 13: Mounting Canopy Top Frame

Places the canopy top frame onto the swing frame and secures it with bolts and nuts.

Step 14: Final Assembly Visualization

Illustrates the completed swing assembly with seating and canopy.

Step 15: Converting to Hanging Bed

Details how to convert the swing to a hanging bed configuration.

Step 16: Final Check and Usage

Confirms the swing is ready for use after assembly.

Guarantee Information

States the product warranty period and conditions for defects.