Need help?Do you have a question about the Numark NDX 800 and is the answer not in the manual?
General| Type | CD/USB Media Player |
|---|---|
| Playback Formats | MP3, WAV |
| Display | LCD |
| Pitch Control | Yes |
| Looping | Yes |
| Hot Cues | 3 |
| BPM Counter | Yes |
| Media Compatibility | USB |
| Effects | Flanger, Echo |
| Outputs | RCA (phono/line) |
| Power Supply | AC 100-240V, 50/60Hz |
| Jog Wheel | Yes, touch-sensitive |
Connects the mixer to a power outlet.
Sets the AC input voltage for the NDX800.
Turns the unit on and off.
Connects NDX800 to a computer via USB for MIDI.
Connects output to the line input of your mixer.
Sends digital audio signal to S/PDIF devices.
Connector for fader start compatible mixers or switches.
Allows two compatible CD players to alternate play.
Indicates when the unit is playing or paused.
Indicates cue point setting or paused cue.
Shows the current track number.
Shows the total number of tracks on the disc.
Indicates when MP3s are present on the disc.
Shows minutes elapsed or remaining.
Shows seconds elapsed or remaining.
Shows frames elapsed or remaining.
Indicates elapsed/remaining time mode.
Shows the tempo in beats per minute.
Shows the percentage change in pitch.
Indicates when Key Lock Mode is engaged.
Indicates when a loop is programmed.
Displays folder/CD/MP3 tag information.
Ejects the CD from the unit.
Connects USB storage for MP3 playback.
Selects audio source (CD, USB, MIDI).
Skips tracks, navigates folders, enters selection.
Returns to previous folder or file.
Starts music playback.
Stops music playback and sets cue point.
Returns to last cue point and pauses.
Used for searching, pitch bending, scratching.
Toggles scratch mode on or off.
Allows quick scanning through tracks.
Adjusts music start/stop speed.
Helps BPM counter detect tempo.
Controls pitch range and engages Key Lock.
Controls the speed of the music.
Briefly adjusts music speed for beat matching.
Plays CD backwards.
Defines and repeats loop points.
Used for hot cues, samples, and loop functions.
Adjusts loop length.
Records samples and sets hot start points.
Changes function of trigger buttons.
Creates track playback sequences.
Stores and recalls cue points.
Selects playback mode (Single, Random, etc.).
Toggles effect mode on or off.
Chooses the desired effect.
Adjusts the balance between effected and unaffected audio.
Adjusts effect parameters or menu options.
Toggles time display mode.
Displays information and functions.
Selects desired scratch mode (Vinyl, Cue, etc.).
Changes the key of the current song.
Sets Relay Mode for alternate play.
Adjusts search speed.
Accesses menu options for settings.
Acts as a second set of loop buttons.
Sets up to three instant cue points.
Records audio samples up to 5 seconds.
Defines the start point of a loop.
Defines the end point of a loop.
Repeats playback from loop in point.
Adjusts loop length.
Plays only a specific music frequency.
Creates a reverb effect.
Mutes/unmutes music in time with rhythm.
Alternates playing left/right speaker channels.
Sweeping phase shifter effect.
Sweeping effect with harmonic sound.
Adjusts balance between effected and unaffected audio.
Steps to access the USB device.
Navigating files on USB storage.
Recommendations for USB device use.
Connects NDX800 as USB MIDI controller.
To Next Page
