Numark NS7 - Pad Mode and Track Controls


! !
(A) REMOVE THE 4 PCS OF VR KNOB
(B) REMOVE THE 8 PCS SCREW BEFORE REMOVAL OF FRONT PANEL.
(C) REMOVE THE 2 PCS SCREW.
(D) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF CROSS FADER PCB.
(E) REMOVE THE 4 PCS OF SCREW.
(F) REMOVE THE 2 PCS CONNECTOR BEFORE REMOVAL OF FADER PCB.(L&R)
(G) REMOVE THE 4 PCS OF SCREW.
(H) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF METER PCB.
!