Numatic CRG 8055/100T Original Instructions

22
www.numatic.co.uk
After use, empty waste water tank using emptying hose and ush-out with
clean water.
Remove oor tool vacuum hose ensuring you remove the U-bend clip and ush out
with clean water.
Empty clean water tank, using emptying hose and again ush out with clean water.
NOTE: The separator can be hung from either side of the top tank while you maintain the machine using the clip on the
front of the lid.
A
B
C
When retting the separator make sure you engage the front of the separator BEFORE pushing the separator down.
Ret the vacuum hose.
Machine Cleaning
Always ensure that the machine is switched o prior to any maintenance.
!!
Remove hose. Remove separator and clean. Clean and examine rubber seal during
each clean.
A
B
C

Numatic CRG 8055/100T Specifications

General

Brand	Numatic
Model	CRG 8055/100T
Category	Dryer
Language	English