EasyManua.ls Logo

Number 8 NO8 MEDIUM AZ User Manual

Number 8 NO8 MEDIUM AZ
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MEDIUM
GARDEN SHED
2280mm wide x 1530mm deep x 1980-1830mm high
ASSEMBLY
INSTRUCTIONS
YOU SHOULD HAVE TWO PACKAGES:
1 cardboard package
1 channel pack
TOOLS REQUIRED:
Battery or electric drill
3.3mm (1/8th inch) drill bit
Screwdriver or riveter
Tape measure
Ladder
Non-slip gloves, good shoes and goggles
A set of helping hands
CALL 0508 454 873
for an installer near you
Some parts have sharp edges and should be handled very carefully.
We recommend the use of protective gloves and footwear when assembling.
DO NOT attempt to erect this shed in windy weather. All dimensions are approximate.
Question and Answer IconNeed help?

Do you have a question about the Number 8 NO8 MEDIUM AZ and is the answer not in the manual?

Number 8 NO8 MEDIUM AZ Specifications

General IconGeneral
BrandNumber 8
ModelNO8 MEDIUM AZ
CategoryOutdoor Storage
LanguageEnglish

Summary

Medium Garden Shed Assembly Instructions

Tools Required

Lists essential tools needed for assembling the garden shed.

Packages Included

Identifies the two main packages that comprise the shed kit.

General Safety Precautions

Advises on handling sharp edges and assembly conditions.

Components Checklist

Instructions to verify all parts are present and undamaged.

Important Assembly Notes

Key tips on swarf removal, part cutting, and fixing methods.

Ribs and Pans Explained

Guidance on fixing placement relative to shed ribs for strength.

Step 1: Door Assembly

Detailed instructions for assembling the shed door.

Step 2: Hanging the Door

Steps for attaching door jambs and mounting the door.

Step 3: Front Wall Assembly

Guide to constructing the front wall panel.

Fitting Channels

Correct orientation and fixing of channels for structural integrity.

Step 4: Back Wall Assembly

Instructions for joining and capping the back wall sheets.

Step 5: Roof Assembly

Steps for attaching roof sheets, channels, and flashings.

Step 6: End Walls Assembly

Guide for fitting 'U' channels to sloping end wall sheets.

Step 7: Door Braces Installation

Procedure for fitting door braces for stability.

Step 8: Installation

Steps for erecting the shed walls and securing the roof.

Important Assembly Tips

Crucial advice on foundations, environment, handling, and safety gear.

Shed Floor Considerations

Emphasizes the importance of a floor, especially a concrete one, for stability.

Step 9: Complete Your Shed

Focuses on foundation specifications and flooring options.

Recessed Concrete Floor Plan

Specifications and diagrams for creating a suitable concrete foundation.

Flooring Options

Details on recessed floor clamps, flat floor clamps, and kitset wooden floors.

Warranty Information

Outlines the 15-year home use warranty terms and conditions.