Make sure the space between the child and the
Shoulder Harness Straps is about the thickness of one
hand.
Canopy
1 Flip out visor from underneath the front canopy bow
(27)
2 Pull out the extendable ‘smart visor’ from in between
the two visor layers (28)
3 Attach the magnets on each corner to the front of the
child restraint (29)
4 The Peek-a-boo on the back can be opened for
ventilation (30)
Detach Canpoy Seat Pad
1 Detach the snaps to disassemble the canopy, press the
button in the canopy mount and pull the canopy bow
out. (31)
2 Pull the fastening pis underneath the edge of the seat
out. (32)
3 Press the red button to disengage the buckle. (23)
Remove the Infant Insert and crotch strap.
4 Detach the elastic band on the head support, and then
remove the head support.
5 Remove the seat pad from the adjustment button as
shown in. (33)
6 Remove the seat pad from the Stroller release button
as shown in. (34)
Installation without Base
1 DO NOT install this Bugaboo turtle by Nuna enhanced
child restraint on vehicle seats with Lap Belts. (35)
18
EN
To Next Page
Loading...
Need help?
General
