1514
INSTALLATION
INSTALLATION
Installation - ISOFIX
Compatible Connector Guides
TO FIT:
1 Press the release button
under the front of the
base.
2. Swing the ISOFIX
compatible connectors
forward to their operating
position.
3 Attach each connector to
the vehicle ISOFIX low
anchorages.
Push rmly to connect.
Before fitting see general
installation instructions on
pages 7 & 8
3
1
2
3
5 Pull the base back to en-
sure both lower connec-
tors are engaged.
5
TO RELEASE:
6 Press both buttons
rmly. The connector will
release.
Pull the base back.
Storage
Store the ISOFIX compat-
ible connectors by swing-
ing them back until they
are snugly alongside the
base.
4 Indicator will show green
when connected.
4
6
Press both buttons
to release
To Next Page
Loading...
Need help?
General
