NURSAL PL-029G - User Manual

Questions and Answers

M
Michael RichardsonAug 4, 2025
Why intensity is not felt with NURSAL PL-029G?
- K
  Kimberly JohnsonAug 4, 2025
  If you're not feeling the intensity on your NURSAL Massager, here's what you can check: * Ensure both pads are firmly attached to your skin. * Remove any transparent films from the pad's adhesive surface. * Make sure the pads aren't stacked or overlapping. * Verify the cord is correctly connected to the unit. * Increase the intensity level. * Charge the battery if it's low. * Clean the adhesive surface of the pads gently under running water if dirty or dry. * Reduce the application time or intensity if set too high.
T
Tara WeaverAug 10, 2025
What to do if NURSAL Massager has no power source and no display on LCD?
- D
  Dylan DavisAug 10, 2025
  If your NURSAL Massager has no power and the LCD isn't displaying anything, the battery might be depleted. Try charging the battery.
K
Kelly MendezAug 16, 2025
Why does my NURSAL Massager power cut off during use?
- K
  Kenneth BergAug 16, 2025
  If your NURSAL Massager is cutting off during use, the battery may be weak and needs charging. Alternatively, the cord might be broken and needs to be replaced.
M
melissawilsonAug 22, 2025
Why is the adhesive surface of my NURSAL Massager pad not sticky?
- A
  Amber OwensAug 22, 2025
  If the adhesive surface of your NURSAL Massager pad isn't sticky, it could be due to deterioration or improper storage (high temperature, high humidity, or direct sunshine). In either case, replace the pad or contact the vendor for replacements.
A
Amy HartmanAug 28, 2025
Why does one pad of my NURSAL PL-029G feel stronger than the other?
- S
  Stacy McphersonAug 28, 2025
  It's normal for one pad to feel stronger than the other with the NURSAL Massager, as different areas of your body will react differently. Ensure the pads are moist and making good contact.