What to do if my NURSAL ZX-581 does not turn on?
If your NURSAL Massager isn't turning on, it might be due to incorrectly installed or dead batteries. Try removing and re-installing the batteries correctly, or replace them with new ones.
Why is the stimulation weak on my NURSAL ZX-581?
If you're experiencing weak or non-existent stimulation with your NURSAL Massager, several factors could be the cause. First, ensure the electrode heads are in close contact with your skin and are not touching each other. Also, check that the wires are properly connected to both the electrode heads and the main device. Finally, make sure the batteries aren't dead. Remove the electrode heads, clean them, and place them back on your skin, ensuring they are separated. Disconnect, clean, and reconnect all parts. If the issue persists, replace the batteries.
Why does my skin turn red after using NURSAL Massager?
If your skin turns red after using the NURSAL Massager, it's likely because the treatment time was too long. Reduce the duration of your sessions.
What to do if skin feels numb using NURSAL ZX-581?
If your skin feels numb after using the NURSAL Massager, it could be because the electrode heads are dirty or too closely touching the skin. Clean them with a damp cloth and reposition them on your skin.
Critical warnings for users with implanted medical devices or life-maintaining equipment.
Consult a physician if you have specific medical conditions before purchasing or using the device.
Important usage restrictions and precautions, including avoiding driving, sleeping, or certain body areas.
To Next Page
General