To Next Page
J
Jeremy HernandezAug 10, 2025
Why is my Nussbaum HL 2.30 NT Lifting Systems not lifting?
- CcmartinezAug 10, 2025
If your Nussbaum Lifting Systems is not lifting, several factors could be the cause. Here's what to check: * **Power Supply:** Ensure there is electrical power. * **Main Switch:** Verify the main switch is on. * **Operating Lever:** Check the function of the operating lever. * **Fuses:** Inspect the fuses for any faults. * **Feed Line:** Look for cuts in the feed line. * **Motor:** Allow the motor to cool down if it's overheated. If the motor is defective, perform an emergency lowering (see chapter 6.1). * **Phases:** Have an electrician check if only 2 phases are active. * **Hydraulic Oil:** Refill if there is not enough hydraulic oil in the tank. * **Gear Pump:** Contact your service partner if the gear pump is defective.
General
