To Next PageTo Next Page
Need help?Do you have a question about the Nussbaum SMART LIFT 2.30 SL and is the answer not in the manual?
General| Brand | Nussbaum |
|---|---|
| Model | SMART LIFT 2.30 SL |
| Category | Lifting Systems |
| Language | English |
Details on installation, testing procedures, and initial checks for the lift system.
Information about potential hazards, warnings, and safety precautions during operation.
Information about the manufacturer of the lift system.
Description of the lift's intended use and application.
Procedures and requirements for documenting modifications to the lift's design.
Guidelines for relocating the lift and necessary checks after moving.
Official declarations confirming the lift meets relevant directives and standards.
Detailed technical specifications of the lift, including dimensions and capacity.
Description and function of various safety mechanisms integrated into the lift.
Specific data sheets for components or the lift itself.
Drawings and specifications for the required foundation for safe installation.
Diagram illustrating the electrical connections and circuit layout of the lift.
Instructions on how to correctly position a vehicle on the lift for safe lifting.
Step-by-step guide on how to safely lift a vehicle using the lift.
Explanation of the electronic system for synchronizing the lift's movement.
Instructions on how to safely lower a vehicle from the lift.
Explanation of the LED indicators on the control unit and their meanings.
Troubleshooting steps for when the lift fails to move up or down.
Troubleshooting steps for when the lift cannot be raised.
Troubleshooting steps for when the lift cannot be lowered.
Actions to take if the lift moves onto an obstacle.
Procedure for safely lowering the lift in case of power failure.
Information on the lift's safety mechanism and when it activates.
Steps to manually equalize the lifting rails for proper synchronization.
Procedure for adjusting the lift's upper and lower end stop settings.
Explanation of the lubrication and maintenance schedule stickers found on the lift column.
Daily tasks for cleaning and checking operational signs and labels.
Yearly lubrication and inspection tasks for the lift spindle and v-belt.
Procedure for measuring wear on the carrier nut using a gauge pin.
General guidelines and prerequisites for setting up the lift correctly.
Detailed instructions for properly setting up and anchoring the lift to the foundation.
Steps for electrical assembly and connecting the lift to the power supply.
Instructions for assembling the standard lifting arm.
Procedure for mounting the safety bar onto the shorter lifting arms.
Steps for the final commissioning and safety inspection before use.
Specifications for selecting Liebig anchors for installation without floor covering.
Specifications for selecting Liebig anchors for installation with floor covering.
List of tools needed for performing safety inspections.
Components included in the delivery for safety system installation.
Step-by-step instructions for fixing the capture bar.
