NuStep, Inc. ● 5111 Venture Drive, Ann Arbor MI 48108 USA ● 800-322-4434
53516 Foot Secure System Instruction, Rev C
How to Install the Foot Secure System on a NuStep
®
T5 / T5
XR
Right foot pedal shown in instruction.
Tools Required Accessory Kit Parts
10 mm wrench (2) 50801 Assembly – Ankle Strap
(2) 50802 Assembly – Toe Strap
(8) 51455 Bolt-Hex, M6x1x12
Place hex bolt through 1
hole to attach toe buckle strap to inside top hole of
footpedal. Place hex bolt through 2
nd
hole to attach ankle buckle strap to inside
bottom hole of footpedal. Attach ladder straps to outside using hex bolts.
Tighten hex bolts with 10 mm
wrench-D
Tighten only until hex bolt bottoms
out. All straps will be loose with a
slight gap. If over tightened, hex
bolt may damage the threaded
insert in the pedal.
Feed ladder strap end into buckle
strap end.
The completed assembly of the
right footpedal is shown far right.
Complete left footpedal with buckle straps on inside, ladders straps on outside.
Ankle
Ladder straps
Gap
Toe
Buckle straps
To Next Page
