To Next PageTo Next Page
Need help?Do you have a question about the NuTone CV-352 and is the answer not in the manual?
General| Motor | Bypass |
|---|---|
| Capacity | 6 gallons |
| Voltage | 120V |
| CFM | 110 |
| Noise Level | 72 dB |
| Amperage | 12A |
Details installation planning for a ranch style house, showing power unit location and tubing runs.
Illustrates installation planning for a two-story house with a power unit in the basement.
Provides guidelines for selecting an optimal location for the central cleaning system's power unit.
Offers advice on choosing suitable locations for wall inlets for maximum cleaning access.
Explains procedures for running and connecting tubing throughout the home.
Details the steps for preparing wall openings for inlet installation during new construction.
Provides installation hints and guidelines for running tubing for the central cleaning system.
Covers cutting, preparing, and cementing tubing sections for the central vacuum system.
Explains the use of nail plates to protect tubing where building materials are attached.
Specific instructions for installing the Model 360 wall inlet after finishing walls.
Instructions for installing the Model 330 wall inlet during new construction rough-in.
Details the procedure for securely mounting the central cleaning system's power unit.
Explains how to connect intake and exhaust tubing to the power unit.
Provides guidelines for grounding and connecting the low voltage wiring for the system.
States that layout and planning are the same for existing as new construction.
Explains how to find accessible areas for running tubing in existing homes.
Details the process for installing wall inlets in existing construction.
Describes cutting holes and securing floor inlets in both new and existing construction.
