EasyManuals Logo

NuTone IS-515 Series User Manual

NuTone IS-515 Series
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
READ & SAVE THESE INSTRUCTIONS!
INSTALLATION INSTRUCTIONS
®
FIGURE 1
DATA
SELECTOR
SWITCH
INTERCOM
AUDIO
RED
RED/WHT
BLK/WHT
BLK
ORN
ORN/WHT
5" Indoor Speaker
MODEL: IS-515 Series
5" Patio Speaker
MODEL: IS-519
For use with NuTone IM-5000 or IM-5006 Intercom Systems.
ROUGH-IN FRAME MOUNTING
The speakers are mounted to the IR-50 Rough-ln
Frame.
New Construction
NOTE: Refer to the instructions packaged with the
rough-in.
The Rough-ln Frame is mounted to a wall stud
during rough-in construction. The wiring is ran to
the speaker location. The speaker is mounted to
the rough-in frame once the wall is in place.
Existing Construction
NOTE: Refer to the instructions packaged with the
rough-in.
The Rough-ln Frame requires a cutout to the
finished wall. The Frame may be mounted either
directly to a wall stud or between the wall studs.
The wiring is installed through the existing walls.
WIRING
RATING: INPUT 19vDC, 40mA
OUTPUT 60mW
Refer to Figure 1. Connect the color-coded wires
from the Master Station to the matching terminal
screws on the speakers printed circuit board.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NuTone IS-515 Series and is the answer not in the manual?

NuTone IS-515 Series Specifications

General IconGeneral
BrandNuTone
ModelIS-515 Series
CategorySpeakers
LanguageEnglish

Related product manuals