NuTone LA203WH

1
WIRELESS DOOR
CHIME PUSHBUTTON
THIS PACKAGE INCLUDES:
n
Wireless Pushbutton and Battery
INSTALLATION
The wireless pushbutton (A) is compatible with NuTone wireless
chimes. (Purchase separately) Refer to installation instructions
provided with wireless chime.
1. Open battery cover (B) by sliding it in direction indicated by arrow.
(Figure 1)
2. Install battery (C) into wireless pushbutton. (Figure 2)
INSTALLATION & OPERATING INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
FIGURE 3
1
2
FIGURE 1
FIGURE 2
A
B
C
+ -
3. Insert wireless pushbutton mechanism into escutcheon as shown.
(Figure 3)
4. Test operation. Hold wireless pushbutton near chime and press
pushbutton. If chime does not sound - see a. through c. on page 2.
ESCUTCHEON
(NOT INCLUDED)

NuTone LA203WH Specifications

General

Brand	NuTone
Model	LA203WH
Category	Intercom System
Language	English

Summary

Installation Guide

Open Battery Cover

Instructions for opening the battery cover on the wireless pushbutton by sliding it in the indicated direction.

Install Battery

Guidance on correctly inserting the battery into the wireless pushbutton unit.

Mount Pushbutton Mechanism

Steps for inserting the wireless pushbutton mechanism into the escutcheon.

Test and Troubleshoot Operation

Procedure for testing the pushbutton and initial steps if the chime does not sound.

Secure Pushbutton Assembly

Instructions for closing the battery cover and mounting the assembled pushbutton to the wall.

Assign Door Tunes

Information on assigning specific doors or tunes to multiple wireless pushbuttons.

Battery Replacement Procedures

Wireless Chime Battery

Instructions for replacing batteries within the main wireless chime unit.

Wireless Pushbutton Battery

Guidance on replacing the battery in the wireless pushbutton assembly.

Additional Wireless Devices

Using Multiple Chimes and Pushbuttons

Advice on setting code settings for multiple wireless chimes and pushbuttons to avoid interference or synchronize ringing.

Wireless Installation Troubleshooting

Chime Rings Unsolicited

Diagnosing and resolving issues where the chime rings without a pushbutton press, often due to code settings.

Chime Fails to Sound

Troubleshooting steps for when the chime does not activate when the pushbutton is pressed.

Regulatory Compliance