NuTone IMA-4406 Series User Manual

CD/RADIO
INTERCOM SYSTEM
MODEL IMA-4406 SERIES
HOMEOWNERS
OPERATING INSTRUCTIONS
Product specifications subject to change without notice.
Printed in
China , 3/03, Part No. 62378
Two Year Limited Warranty
WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products that
such products will be free from defects in materials or workmanship for a period of two (2)) years
from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
During this two year period, NuTone will, at its option, repair or replace, without charge, any
product or part which is found to be defective under normal use and service. THIS WARRANTY
DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES. This warranty does not
cover (a) normal maintenance and service or (b) any products or parts which have been subject to
misuse, negligence, accident, improper maintenance or repair (other than by NuTone), faulty
installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the two year period as specified for the express
warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above
limitation may not apply to you.
NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE’S OPTION, SHALL BE THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. NUTONE SHALL
NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT
OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state. This warranty supersedes all prior warranties.
WARRANTY SERVICE: To qualify for warranty service, you must (a) notify NuTone at the
address stated below or telephone 1/800-543-8687, (b) give the model number and part
identification and (c) describe the nature of any defect in the product or part. At the time of
requesting warranty service, you must present evidence of the original purchase date.
Date of Installation Builder or Installer
Model No. and Product Description
IF YOU NEED ASSISTANCE OR SERVICE:
For the location of your nearest NuTone Independent Authorized Service Center:
Residents of the contiguous United States Dial Free 1-800-543-8687
Please be prepared to provide:
Product model number • Date and Proof of purchase • The nature of the difficulty
Residents of Alaska or Hawaii should write to: NuTone Inc. Attn: Department of National Field
Service, 4820 Red Bank Road, Cincinnati Ohio 45227-1599.
Residents of Canada should write to: Broan-NuTone Canada, 1140 Tristar Drive,
Mississauga, Ontario, Canada L5T 1H9.
Rev. 03/2001

NuTone IMA-4406 Series Specifications

General

Brand	NuTone
Model	IMA-4406 Series
Category	Intercom System
Language	English

Summary

NuTone Limited Warranty

Warranty Service Procedures

Details on how to qualify for warranty service, including notification and proof of purchase requirements.

Obtaining Product Assistance

Provides contact information for obtaining assistance or service for the product.

FCC Information and Warnings

Radio Frequency Compliance

Advises on radio frequency energy usage and potential interference from modifications.

System Maintenance and Features

Deactivating CD Pause

Steps to disable the automatic CD pause during intercom or chime events.

Optional Accessories

Lists optional accessories like cassette players and door chimes to enhance system functionality.

Resetting the Microprocessor

Instructions on how to reset the system's microprocessor, noting potential data loss.

Master Station Controls

Radio and CD Player Controls

Buttons for tuning radio, playing CD, track selection, and playback modes.

Audio, Volume, and Display Settings

Adjustments for audio volume, tone, loudness, and display modes.

Intercom, Station Modes, and System Configuration

Controls for intercom calls, volume, station modes, and timer settings.

Deactivating Remote Radio/CD Control

Disabling Remote Functions

Steps to disable remote control of radio and CD player features.

Digital Clock Functions

Setting Time and Radio Timer

Step-by-step guide to setting time and configuring automatic radio on/off timers.

Intercom Operation

Responding to Door Calls

How to respond to door intercom calls using the hands-free feature.

Call Management and Monitoring

Methods to terminate calls, use monitor function, and control intercom volume.

Station Status and Audio Source

Configuring Station Modes

Defines modes like RADIO/INTERCOM, INTERCOM ONLY, OFF, and MONITOR for each station.

Identifying Station Locations

Procedure to identify and label the location of each remote station.

Selecting and Tuning Audio Sources

How to choose between sources and tune AM/FM radio frequencies.

Radio Memory Operations

Storing and recalling favorite radio frequencies using memory channels.

CD Player Operations

Disc Handling and Playback

Proper methods for handling, loading, playing, and selecting tracks on the CD player.

Music Search and Modes

How to search tracks and use CD player modes like repeat or random.

Audio Source Selection and Control

Tape and Auxiliary Input

How to connect and play audio from TAPE or AUX inputs.

Program Audio Adjustments

Controls for setting volume, bass, treble, and loudness for program audio.

Remote Control of Radio and CD Player

Advancing Radio Memory Channels

How to change stored radio channels from a remote station.

Remote CD Player Control

Steps to turn CD player on/off and advance tracks from a remote station.

CD Player Operation Modes

Repeat Play Functionality

Instructions for setting repeat play for one track or all tracks.

Advanced CD Player Features

Random Playback and Display Modes

How to enable random playback and change display to track number or time.

Automatic CD Pause and Error Handling

How CD player pauses during intercom and what CD error tones signify.