EasyManua.ls Logo

NuTone IMA-3303 User Manual

NuTone IMA-3303
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
9
SYSTEM OPERATING CONTROLS
PM
21
22
20
19
18 17 16 15 14
13
12 11
1
2
3
4 5
6
7
8
9 10
Master Station Controls
1
END CALL: Ends intercom communication and returns system
to audio source.
2 DOOR TALK: Initiates intercom communication to the door
speakers.
3
INSIDE/PATIO: Initiates intercom communication to remote
stations.
4 TIMER: Enables or disables the radio timer. The indicator
light will illuminate next to the timer button when the Radio
timer is enabled.
5 PROGRAM AUDIO SOURCE: Selects the program audio
source: AM, FM, CD/TAPE and AUX. The indicator light will
illuminate next to the selected program audio source.
6 PROGRAM OFF: Turns off the selected program audio source.
NOTE: The Program Off key does not affect the intercom
operation.
7 MASTER VOLUME: Adjusts the volume at the master
station.
8 MEMORY 1-6 KEYS: Provides direct access to stored radio
frequencies.
9 ▲ ▼ UP/DOWN TUNING: Provides manual tuning of the
AM/FM radio.
10 SCAN: Activates scan tuning during AM/FM operation.
11 DOOR RELEASE KNOCKOUT: Mounting hole for optional
door release push button.
12 MICROPROCESSOR RESET: Initiates a reset of the micro-
processor. NOTE: A reset of the microprocessor will erase the
system’s memory.
13 MEMORY SET: Stores desired radio frequency into a selected
memory location.
14 TIME SET/HOUR/MIN: Used when setting the timer and
clock.
15 TREBLE: Adjusts the high frequency audio content of the
source audio.
16 BASS: Adjusts the low frequency audio content of the source
audio.
17 SYSTEM VOLUME: Adjusts the program audio level
throughout the system.
18 LOUDNESS: Compensates for the loss of bass and treble
response the human ear has when listening to audio at low
volume levels.
19 INTERCOM VOLUME: Adjusts intercom audio level
throughout the system.
20 MASTER STATION STATUS SWITCH: Sets the master station
in one of the following modes: RADIO INTERCOM,
INTERCOM ONLY, OFF or MONITOR.
21 REMOTE STATION STATUS SWITCHES: Sets the remote
stations in one of the following modes: RADIO INTERCOM,
INTERCOM ONLY, OFF or MONITOR.
22 ELECTRONIC CHIME TUNE SELECTION: Selects the tune
of the optional IA-29 Electronic chime.
FIGURE 20
Question and Answer IconNeed help?

Do you have a question about the NuTone IMA-3303 and is the answer not in the manual?

NuTone IMA-3303 Specifications

General IconGeneral
BrandNuTone
ModelIMA-3303
CategoryIntercom System
LanguageEnglish

Summary

Master Station Controls

END CALL

Ends intercom communication and returns system to audio source.

DOOR TALK

Initiates intercom communication to the door speakers.

INSIDE/PATIO

Initiates intercom communication to remote stations.

MASTER VOLUME

Adjusts the volume at the master station.

SYSTEM VOLUME

Adjusts the program audio level throughout the system.

INTERCOM VOLUME

Adjusts intercom audio level throughout the system.

Operational Checkout

Setting System Volume

Setting Intercom Volume

Diagnostic Tests

Installer's Troubleshooting Guide

No Radio or Intercom

Troubleshooting steps for no radio or intercom operation.

Troubleshooting Guide - Hum and Static

Related product manuals