CD Operating Selection Modes (continued)
RANDOM PLAY
1. While the CD is playing, press RDM/RPT key 3 times
to change from normal play mode to Random
Play mode.The letters RDM will display, and the player
will select and play one track and then randomly select
another track and begin playing.
2. Press the RDM/RPT key once to end random play. Normal play continues from
that point.
3. If the CD Player is stopped and restarted while in the RMD/RPT mode, the last track
played will be the first track played once the player restarts.
4. Pressing STOP discontinues play of the CD Player.
5. Anytime the CD door is opened, the play mode will change to the normal
play mode.
MASTER DISPLAY IN CD MODE
The Master Station LCD display can be selected to
indicate the TRACK NUMBER or TIME PLAYED instead
of the standard TIME mode by using the DISPLAY key.
Displaying Track Number
1. While the CD Player is playing, momentarily pressing the DISPLAY key on the master
station will change the LCD from TIME to TRACK NUMBER.
2. The TRACK NUMBER will display until the CD Player stops or the CD Player door is
opened.
3. To return the display to TIME while in Track Number mode, momentarily press the
DISPLAY key two times.
Displaying Time Played
1. While the CD Player is playing, momentarily pressing
the DISPLAY key on the master two times will change
the LCD from TIME to TIME PLAYED.
2. The TIME PLAYED will display until the CD Player
stops or the CD Player door is opened.
3. To return the display to TIME while in Time Played mode, momentarily press the
DISPLAY key one time.
AUTOMATIC PAUSE DURING INTERCOM AND CHIME
OPERATION
The master station will automatically pause the CD Player when the INSIDE/PATIO or
DOOR INTERCOM is in use. In addition, the CD Player will pause when an optional
chime is playing. During Automatic Pause, the play symbol will flash.
To deactivate this feature read Deactiv
ating the CD Pause During Intercom and
Chime Operation .
CD ERROR TONES
Should the CD Player detect a scratched disc or a vibration, the master will sound
5 beeps at all remote stations selected to the RADIO INTERCOM mode. In addition, the
or Err display will flash at the master station until the CD Player is restarted or
the CD door is opened.
11
Controlling the CD Player & Radio from
Remote Stations
To add convenience to your IMA-4406 CD/Radio/Intercom System, NuTone has designed
the capability of controlling the CD Player, AM and FM Radio operation from any room in
the home or office from remote stations. It’s like having a master station in every room!
These features are preprogrammed into the master station. Read and follow these simple
instructions to take advantage of this added convenience.
Note: This feature works with older remote station models IS-405, IS-408, IS-409
and/or IC-401.
Should you decide to deactivate any of these features, please read section entitled
Deactiv
ating the Contr
ol of Radio/CD from Remote Stations.
The remote stations can be used to:
•Turn the Radio ON or OFF
• Advance through the Radio Memory Channels
•Turn the CD Player ON or OFF
• Advance to the next track on the CD Player
Note: Remotely controlling the CD Player and Radio will not function:
• During intercom communication
• If master is set to TAPE/AUX program position
• If Remote Station Status Switch is selected to OFF or MONITOR.
TURNING THE RADIO ON AND OFF
1. To turn the Radio ON or OFF, simply press and hold the AM/FM/CD CONTROL/END
CALL key for 2 seconds.
2. Release the AM/FM/CD CONTROL/END CALL key after the radio turns on or off.
3. While the AM/FM/CD CONTROL/END CALL key is pressed at the controlling remote,
the Master station will display the letters IU (in use). This indicates that a control
function is currently being performed at a remote station.
To Previous Page
Loading...
Need help?
General
