SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
70D 99043303E
Mount insert so bottom of custom hood is 24’’ to 30’’
above cooking surface.
RMIP SERIES
INSERT
Custom Hood Liner
RML33 or RML45 Series
Backsplash
RMP Series
RMIPWC Remote Control
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
Bafe Filters
RBFIP Series
4”
Adjustab
le depth
(See liner spec
sheet
fo
r details)
Fits custom hood nomina
l
width 36
”, 42”, 48”, 54
”
or 60
Especially designed to be installed in custom hood
for use over residential commercial-style
cooking surfaces.
A complete installation requires several optional
components. Refer to page 2 when planning your
installation.
FEATURES
• Cabinet mount
_
custom application
• Widths: 33’’, 45’’
• Halogen lighting (33’’
_
2 x 50 watt; 45’’
_
3 x 50 watt
PAR20)
Lamps not included
• Controls: rocker switches for lighting and on-off,
knob for innite speed
• Heat Sentry™ turns blower ON to HIGH speed when
excess heat is detected
OPTIONS
• Custom hood liners (RML33 or RML45 Series):
Widths - 36’’, 42’’, 48’’, 54” and 60’’
Adjustable depth - see liner spec. sheet for details
Stainless Steel construction - protects custom hood
base
and wipes clean easily
• Dishwasher-safe stainless steel bafe lters RBFIP
Series
• Backsplash (RMP Series):
Widths - 36’’, 42” 48”, 60”
Stainless Steel construction - protects back wall
and wipes clean easily
• RMIPWC Remote control: With Stainless Steel
faceplate,
to t any décor.
INSERT SPECIFICATIONS
120 Vac, 60 Hz
Amps (without blower): 0.8 (RMIP33) 1.3 (RMIP45)
To Next Page
Need help?
General
