3
• Caution must be observed
if hot liquid is poured
into the blender as it can
be ejected out of the
appliance due to sudden
steaming.
BLENDING WITH
nutribullet
®
CUPS:
To avoid personal
injury, never blend hot
ingredients or liquid in
any sealed nutribullet
®
cup!
Heated ingredients
can pressurize sealed
containers when
agitated and cause cup
and blade separation
or violently expel hot
contents upon opening.
Always start the
blending process with
room temperature or
refrigerated ingredients
and liquids (21°C/70°F or
cooler).
Never continuously
operate for longer
than necessary to
create your recipe —
generally less than one
minute. Friction from
prolonged operation
can heat ingredients
and generate internal
pressure in the sealed
container. This pressure
can cause the cup and
blade to separate or
blended contents to
erupt from the container,
resulting in possible
personal injury and/or
property damage. If the
sealed nutribullet
®
cups
are warm to the touch,
power o your machine
and allow the vessel to
cool for fifteen minutes
or more. Allow contents
to settle before slowly
releasing the cup from
the motor base. With the
nutribullet
®
cup, pointed
away from your face and
body, slowly unscrew
the easy-twist extractor
blade
to gently release any
residual pressure.
If you need to blend for
longer than one minute,
blend for 1-minute
intervals. After each
1-minute interval, allow
the motor base to shut o
completely and wait at
least one minute before
starting the next cycle.
Do not run for more than
3 consecutive 1-minute
intervals to prevent the
contents from overheating.
Allow contents to settle for
2-3 minutes after the third
blending cycle to prevent
WARNING!
WARNING!
To Next Page
Loading...
