NUTRIBULLET PRO 1000 - Stove-Top Heating Safety

7
and unit has powered
down.
• Do not allow the cord
to hang over the edge
of the table or counter.
Do not pull, twist, or
damage the power
cord. Do not allow
the cord to touch hot
surfaces, including
the stove.
• If the motor stops
working, unplug the
motor base and let
it cool for at least
15 minutes before
attempting to use it
again. Your NutriBullet
PRO
®
1000 has an
internal thermal breaker
that shuts o the motor
when it overheats. The
thermal breaker will
reset when the unit is
unplugged and the
thermal breaker cools
down suciently.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a
circuit that is regularly
switched on and o by
the utility.
STOVETOP
HEATING SAFETY
Do not blend hot
ingredients in any sealed
NutriBullet
®
cup!
To heat items that have
been blended at room
temperature or cooler
(21°C/70°F or less),
transfer mixture to a
stovetop pot to heat. Use
a thermometer to test
the internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be
hot inside.
The NutriBullet PRO
®
1000 is not intended for
use on the stove top.
Do not place the motor
base or any NutriBullet
®
WARNING! WARNING!