1716
CLEANING THE
NUTRIBULLET
RX
®
MOTOR BASE
HERE’S HOW TO
CLEAN IT UP
STEP 1:
The most important thing is
to UNPLUG the motor base
before cleaning!
STEP 2:
Use a damp rag to wipe
down the inside and outside
of the motor base.
• NEVER SUBMERGE THE
MOTOR BASE IN WATER
OR PLACE IT IN THE
DISHWASHER.
• Never put your hands or
utensils near the moving
blade and never use your
hands or utensils to press
the activator buttons
down while the motor
base is plugged in.
HEAVY CLEANING:
• Should the inside of
the base become sticky
due to spillage you
may follow these
additional cleaning
instructions:
• UNPLUG the motor base
and depress the power
button BEFORE cleaning.
• Place the motor base on
a dish towel to catch any
liquid or debris.
• Create a diluted vinegar
and water solution using
1 TBSP of vinegar and
2 TBSPs of warm water.
Pour the solution into the
motor base where the
blade assembly would
sit during normal use.
• Immediately use a dish
brush to dislodge any
debris and wipe it out
with a damp cloth.
• The motor base is
constructed with a drain
tube to drain any liquid
debris safely through to
the dish towel without
damaging the inside
components.
Save these
instructions!
If you have any comments,
questions, or concerns,
please go to:
www.nutribullet.mx
.
!
®
To Next Page
Loading...
