NUTRIBULLET TRIPLE PREP SYSTEM NBKS50100 - Blending with Nutribullet Cups Safety

54
and blades are completely
stopped before removing or
cleaning unit.
• Remove and safely discard
any packaging material or
promotional labels before
using the appliance for the
first time.
• Do not operate if any of the
parts and accessories are
damaged in any manner
which may impair proper
function or create a safety
hazard. Contact Customer
Service for assistance at:
1 (800) 523-5993.
• Do not use parts or
accessories from other
manufacturers or dierent
models of nutribullet
®
or
magic bullet
®
products. Use
of parts and accessories
NOT specifically designed for
your nutribullet
®
Triple Prep
System may damage your
unit or cause serious injury.
– Use only genuine nutribullet
®
attachments/accessories
specifically designed for
your nutribullet
®
Triple Prep
System. Aftermarket parts
are not made to nutribullet
®
specifications and may
damage your unit or cause
serious injury.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE
NUTRIBULLET
®
WHEN NOT
IN USE.
• To unplug, grasp the plug and
pull from the outlet. Never pull
from the power cord. Always
POWER OFF and UNPLUG the
unit and wait until the Blades
or Discs come to a complete
stop before assembling,
disassembling, changing
accessories, or cleaning.
• The use of attachments
including canning jars not
recommended or sold by the
manufacturer may cause fire,
electric shock or injury.
• This appliance has a
polarized plug (one blade
is wider than the other). To
reduce the risk of electric
shock, this plug will fit in a
polarized outlet only one way.
If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician. Do not
modify the plug in any way.
BLENDING WITH
NUTRIBULLET
®
CUPS
• AVOID HEATING AND
OVER-PRESSURIZING CUP.
NEVER blend hot, warm, or
carbonated ingredients or
liquid in the nutribullet
®
Cup!
Friction from the rotating
WARNING!
pressure in the Cup
over time. Continuous
blending for more than
one minute may cause
the Cup to separate from
the blade, exposing the
blade or expelling heated
ingredients — both of which
can cause injury.
– Do not run consecutive
blending cycles. Allow
contents to settle at least 10
to 15 minutes before running
another blending cycle.
DO NOT attempt to open
the Cup if it feels hot or
warm to the touch. See CUP
CAUTION section for details.
• Do not blend anything
carbonated or eervescent
— no bubbles.
– Carbonated and
eervescent ingredients
(soda, baking powder,
baking soda, yeast, some
batters, cake mix, dry ice,
or other things that become
bubbly) release gasses
that increase pressure
within the Cup. Pressure
from released gases can
cause a sealed nutribullet
®
Cup to separate, resulting
in possible injury and/or
property damage. Note:
Some protein powders
include eerevscent
ingredients. Always check
supplement ingredients
before adding.
blades can cause contents to
heat and pressurize, which
may result in eruption upon
opening. Eruption of the hot
contents and exposed blade
may cause serious bodily
injuries or property damage.
ONLY USE THE BLENDING
PITCHER AND VENTED
PITCHER LID TO BLEND HOT,
WARM OR CARBONATED
INGREDIENTS. Risk of thermal
burn injury due to excessive
pressure in the container. Do
not blend hot liquids when
using CLOSED-TOP Cups.
• NEVER blend hot or
warm ingredients in the
nutribullet
®
Cups.
– Starting with hot or warm
ingredients allows more
heat and pressure to build
up when blending. This can
cause the Cup to separate
from the blade, potentially
expelling hot ingredients and
exposing the blade, both of
which can cause injuries.
– Only blend room-
temperature or refrigerated
ingredients (21°C/70°F
or cooler). After blending,
transfer mixture to a
stovetop pot to heat and eat.
• Do not blend for more than
one minute.
– Blending causes ingredients
to heat up, which builds